Ceramic Coatings

How to Maintain a Ceramic Coating

Now that you have invested in Ceramic Pro protective coatings to protect your asset it is still important to regularly maintain the vehicle via a washing step.

The key benefit of Ceramic Pro coatings are; maintenance becomes easier because dirt and debris are less likely to bond tight to the paint due to the hydrophobic properties & slickness of the coatings. The vehicle will also remain cleaner for longer.

Outlined below are simple steps that will make washing your car a safe and enjoyable process. Utilising these safe washing methods will ensure your ceramic coating will perform over the long term.

Basic Equipment

  • Microfibre Wash Mitt (avoid foam sponges).
  • Microfibre Drying Towel (avoid synthetic or leather chamois).
  • PH Balanced Car Shampoo.
  • 2x Large Buckets.
  • Hose.

Now We’re Getting Serious Equipment

  • Pressure Washer.
  • Snow Foam Bottle Attachment (matched for the pressure washer lance).
  • Blow Dryer.
  • Wheel Woolies/Brushes and bucket dedicated to wheel washing only.
  • Grit Guards.

Basic Washing Method

When possible wash in a shaded area.

  1. Using dedicated wash media for wheels only, clean wheels. If using the same wash bucket, clean it out before refilling it for the wash process.
  2. Fill bucket 1 with soap water (as per car shampoo instructions) and bucket 2 with regular water
  3. Rinse down the vehicle with the hose.
  4. Dunk wash mitt into soapy bucket 1 and starting from top to bottom, wash a section of the vehicle using light back and forth passes. Now rinse the mitt off in bucket 2 to remove dirt and debris from the mitt.
  5. Repeat section 4 until the entire vehicle has been washed.
  6. Rinse down the vehicle
  7. Dry the vehicle using the microfibre drying towel.

Little More Than The Basic Wash Method

When possible wash in a shaded area.

  1. Utilising the pressure washer and snow foam bottle attachment, pre-soak the vehicle in a layer of snow foam (as per snow foam instructions). This will assist in loosening dirt contamination prior to washing.
  2. Insert grit guards into buckets. Utlisise steps 1-6 of the Basic Wash Method however you can now use the pressure washer instead of the hose.
  3. Using an air blower, dry the vehicle however we prefer to use both the air blower and drying towel at the same time.


Things To Avoid

  1. Hosing off a vehicle only – There have been incidents where people believe simply hosing off the car and walking away is a suitable wash method. This is far from ideal and we strongly recommend avoiding this. Town/tap water has been treated with various minerals that can potentially stain the coating/paintwork when left to dry, particularly when exposed to the sun.
  2. Automatic Car Washes – Automatic tunnel wash machines are too aggressive for vehicle paint work and will cause marring and scratching over the long term.
  3. Bird Droppings – Ceramic Pro coatings are designed to protect the paint work from degrading due to the uric acid in bird droppings however we still recommend being diligent when noticing it by safely removing it as quickly as possible. If the vehicle has been freshly washed simply soak a microfibre towel, rest it over the dropping to soften it (if dry) and carefully scoop it up and away from the paintwork. Avoid rubbing as droppings can contain seeds and other abrasive contents that can scratch the paintwork.

What To Do If You Don’t Have Time To Maintain Your Vehicle

Touchless Car Wash – This is an automated car wash machine that applies various chemicals to the vehicle, rinses and blow dries it. You simply drive in and out and it’s done. We do recommend having a microfibre drying towel on hand as the blowers don’t do the best job at drying the vehicle. Once you exit the machine, park the vehicle and properly dry it down.

Car Hand Wash Service – A much better option than automatic car wash however do some research on the service and workmanship quality.

Detailer – Aqcuire the services of a detailer that specialises in maintenance washing. A detailer will provide the safest & best wash method possible however be prepared to pay a premium.

Ceramic Coatings

What is a Ceramic Coating?

Essentially a ceramic coating is an additional clear permanent layer of surface protection technology that bonds with the factory clear coat of your automotive investment.

In a most cases OEM paint systems are made up in several stages.

  1. Substrate – Metal, plastic, carbon etc.
  2. Primer – Primer is applied to the substrate. The primer assists in proper bonding of the base coat.
  3. Base Coat – This is the colour coat of the vehicle.
  4. Clearcoat – This is the top layer of the paint system that protects the colour coat and where the shine comes from.

Ceramic Pro, our ceramic coating of choice is developed using nano-ceramic technology. Ceramic Pro permananently bonds to the factory finish and is 2-3 times stronger than most clearcoats.

Ceramic coatings aide in the prevention of clear coat oxidisation and are much more durable to environmental fallout, such as bird dropping etching, acid rain damage, uv damage and tree sap damage. Ceramic coatings possess higher scratch resistance than the factory paint but please note that ceramic coatings are NOT scratch proof.

Ceramic Coatings last much longer than any paint sealant or wax.

The true advantages of ceramic coatings are in the hydrophobic, super slick & high gloss finish. Due to this cleaning the vehicle is much easier. Dirt simply encapsulates into the hydrophobic water beads and rolls away known as the self cleaning effect. Future waxing and polishing is not necessary.

So if you want the best form of protection for your car, bike or any other automotive investment a ceramic coating by Ceramic Pro is the right choice.

Contact us to learn more

Ceramic Coatings

5 Key Benefits of Ceramic Pro Paint Protection

  1. UV Protection 

Ceramic Pro paint protection will protect your vehicle’s paint from harmful UV rays. If left unprotected, the paint on your vehicle can degrade when exposed to the sun’s UV rays. In extreme conditions the paint can become heavily oxidised and peel away from the substrate which is known as clear coat failure.

In cases like this the only remedy is to repaint the vehicle which can be very costly. Ceramic Pro paint protection will protect your vehicle’s paint from harmful UV rays.

2. Protection from Environmental Fallout

  • Bird Droppings
  • Tree Sap
  • Bug Splatter
  • Tar
  • Oxidation. 
  • Rail dust

If left unprotected these forms of contamination can permanently bond and etch to the paint surface causing damage that would require repainting. 

3. Hydrophobic Repellency 

Ceramic Pro will leave the surface feeling super slick due it’s hydrophobic properties. This means liquids that come into contact with the coated surface will simply bead up and roll away known as the self cleaning effect. 

The vehicle will stay cleaner for longer which reduces the amount of maintenance required and when washing is required it is much easier. 

4. Future Waxing & Polishing Not Required

With proper maintenance, Ceramic Pro’s unique formula leaves a permanent high gloss finish meaning that future polishing and waxing is not required. 

5. Chemical Resistance

Ceramic Pro’s layer will provide the best protection from damaging environmental contaminants and harsh chemicals

Contact us to find out more.  

Ceramic Coatings

Ceramic Pro Coated vs Uncoated

Ceramic Pro provides superior protection against environmental fallout.

The slick hydrophobic properties will mean your vehicle will stay cleaner for longer and makes cleaning much easier!

This video displays the sensational water beading behavior on the coated right side. With proper maintenance the hydrophobic properties will remain for years!

When considering paint protection for your vehicle Ceramic Pro protective coatings will provide superior long term protection compared to a wax or sealant.

Ceramic Coatings

Why Ceramic Pro Paint Protection Is A Sound Investment


Without a doubt investing in aftermarket paint protection will save you A LOT of money!

In most cases dealership paint protection prices are much higher than aftermarket options.

RC Car Care clients have informed us that for the exact same paint protection packages dealerships have quoted upwards of $2000 more than prices we have quoted!

Knowledge, Experience & Workmanship 

Whether your vehicle is new or used, multiple steps are performed during preparation prior to applying a ceramic coating. It is not a matter of just slapping product onto the car after a wash and calling it a day.

We assess the paint in a scientific manner and take steps to ensure the paint is free of contamination, surface defects and is at it’s highest possible shine and clarity. The most major step in this instance is a Paint Correction

Work of this calibre takes years of dedicated experience and knowledge to master. We at RC Car Care take these steps in every detail which is why our reputation is of the highest standard.

Why we use Ceramic Pro Surface Coatings

Ceramic Pro by Nanoshine are at the forefront in the ceramic coating surface protection industry and have been since 2010.

Ceramic Pro design coatings for just about every substrate which means you can choose to protect the paint, glass, alloy wheels, leather & fabric surfaces on your vehicle.

Ceramic Pro coatings last much longer and are of a higher quality in every facet compared to dealership paint protection options.

Ceramic Pro protective coatings are backed by a lifetime warranty*

Ceramic Pro develop coatings for the marine, aviation & industrial industries and have coatings that will protect high traffic areas of your home as well such as kitchen & bathroom areas.

Ceramic Pro Australia only allow highly skilled, insured & reputable business operators to install their coatings.

So you can be rest assured when choosing RC Car Care to protect your investment, your vehicle is in the right hands.

So before deciding on purchasing any dealership paint protection contact us first.

We would be happy to run you through the drill and save you money!